A move is the best time to rethink a Frame TV: a new wall, new light, new Wi-Fi, and a clean slate for the art. It is also when things go wrong, from a cracked panel in transit to an Art Mode that is blank because the network name changed. This checklist walks through the first week in a new home in the order that saves the most headaches.

Before the move: protect the panel and keep your art

• Keep the original box and foam if you can. If not, buy a TV carton sized to the screen; do not ride a blanket-wrapped TV in an open truck bed.
• Transport it upright, never flat or leaning at an angle with weight on the screen. Do not stack boxes against it.
• Remove the stand or wall mount, and keep the screws, bezel pieces, and the One Connect cable in a labelled bag.
• Back up your art. Keep your own originals (downloads, AI generations, photos) in one folder, so you are not relying on what is stored on the TV.
• If you have a magnetic bezel, wrap it separately and see our bezel and accessory guide for care tips.

Day 1: unbox, inspect, and choose the wall

Before anything else, inspect the screen for cracks or pressure marks while the packaging is still on, and photograph any damage for your mover or insurer. Then choose the wall deliberately rather than where the old TV sat. Check these before you drill:

• Light: note where the sun lands in the morning, at noon, and in the evening. The matte screen handles glare well, but direct sun still washes out art. See our ambient light guide.
• Eye height: the center of the screen should sit near eye level from where you most often look at it. Above-fireplace walls are often too high, so check before committing.
• Power route: decide how the cable will reach an outlet. In-wall options are covered in our recessed outlet guide; have a licensed electrician do any in-wall work.
• Stud or wall type: find studs and know whether the wall is drywall, plaster, or masonry before picking hardware.

Day 2: mount and connect

Use a mount rated for your screen size and wall type. A slim-fit mount sits closest to the wall, while a no-gap or full-motion mount gives flexibility; our wall mount guide compares them. If you are renting or cannot drill, see the renters guide. Put the One Connect box somewhere ventilated and reachable, and read our One Connect box guide before sealing it behind a wall.

Day 3: network, accounts, and SmartThings

• Connect the TV to the new Wi-Fi network. If your router name and password changed, the TV will not reconnect on its own.
• Confirm you are signed in to your Samsung account, then open the SmartThings app and check the TV appears in the right room and home. Rename the room if needed.
• Run any pending software update; see the firmware and update guide.
• If you subscribe to the Samsung Art Store, check that the subscription is still active on the same account. See the Art Store subscription review.
• Re-pair the remote if it is not responding; see the remote guide.

Day 4: Art Mode settings for the new room

Settings tuned for your old room often do not suit the new one. Revisit brightness (or leave it on auto), color tone, the motion sensor, and the timer for when Art Mode turns off. Walk through the full Art Mode settings guide and adjust after you have seen the screen in both daylight and evening light. If your art looks too warm or cool, the color temperature guide explains why.

Day 5: the first art to display

Resist loading a huge rotation on day one. Pick one calm piece that works with your wall color and furniture so the room feels settled, then add variety once you have lived with the space for a week or two. Starter prompts for a fresh home:

• “Soft abstract in warm white, oat, and pale sage, subtle texture, lots of negative space, edge-to-edge, no frame, no text”
• “Misty hillside at sunrise in muted watercolor, gentle peach and grey palette, flat artwork, no border”
• “Minimal line drawing of a house and a single tree on cream paper, calm and welcoming, flat artwork”
• “Warm abstract arches in terracotta, sand, and olive, matte paper grain, edge-to-edge”

To match art to your actual walls, photograph the room and follow our room color matching guide or the wall paint color theory post.

Days 6 and 7: finishing touches

• Add or swap the bezel to suit the new decor; the bezel and art style cross-reference helps.
• Tidy the cables with a cable channel rather than cutting into the wall.
• Register the TV and keep your receipt, model number, and serial number with your move documents for warranty claims.
• Set up a simple monthly rotation using the art rotation schedule so the screen stays fresh without constant effort.

Common first-week mistakes

• Mounting before checking sun, outlet position, and eye height, then having to patch holes.
• Moving the TV flat or leaning, which can crack the panel.
• Forgetting the Wi-Fi change and assuming Art Mode is broken.
• Choosing permanent art on day one in an unfinished room with bare walls and boxes.

Frequently asked questions

Can I move a Frame TV in a regular car? Yes, if it is boxed or well protected and carried upright. Keep it out of hot cars for long stretches and never put weight on it.

Will my art disappear when I move? Not usually, but changing networks or accounts can interrupt syncing, so keep your own copies of every image.

Should I buy a new Frame TV for the new home? Only if the old size no longer fits the new wall; see the sizes guide first.